[PHP-users 20769]phpの設定について

[junkers]

こんにちは、ゆん＠茨城です。
以前動いていたphpプログラムをサーバー移動したら動かなくなってしまいまし
た。理由がわからないです。どうか教えてください。
前の環境に戻すため、phpのバージョンは4.2.3　OSはVine2.6を使用しています。
'./configure' '--prefix=/usr' '--with-config-file-path=/etc'
'--enable-force-cgi-redirect' '--disable-debug' '--enable-pic'
'--enable-inline-optimization' '--with-apxs=/usr/sbin/apxs'
'--with-exec-dir=/usr/bin' '--with-bz2' '--with-regex=system'
'--with-gettext' '--with-gmp' '--with-gd' '--with-jpeg-dir=/usr'
'--with-png-dir=/usr' '--with-ttf' '--with-zlib' '--with-gdbm'
'--with-openssl' '--with-layout=GNU' '--enable-debugger'
'--enable-magic-quotes' '--enable-safe-mode' '--enable-sockets'
'--enable-sysvsem' '--enable-sysvshm' '--enable-track-vars'
'--enable-yp' '--enable-ftp' '--enable-wddx' '--without-mysql'
'--without-oracle' '--without-oci8' '--with-xml' '--with-expat-dir=/usr'
'--with-dom=/usr' '--enable-xslt' '--with-xslt-sablot=/usr'
'--with-dom-xslt=/usr' '--enable-iconv' '--enable-mbregex'
'--with-namazu=/usr' '--with-kakasi=/usr' '--enable-mbstring'
'--enable-mbstr-enc-trans' '--enable-versioning' '--enable-zend-multibyte'

php.ini
[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.

;;;;;;;;;;
;  警告  ;
;;;;;;;;;;
; これは Vine Linux 用にチューニングされた PHP 用の設定ファイルである。
; デフォルトでは、PHP は開発するのに適した形でインストールされており、実
行環境
; に適した形にはなっていない。本番へのリリースをする前に、特にセキュリ
ティに関
; する考慮をすることが望まれる。その際は php.ini-recommended や
; http://www.php.net/manual/ja/security.php を参照されたい。

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior.  In order for PHP to
; read it, it must be named 'php.ini'.  PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory.  The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an
expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and
parentheses:
; |        bitwise OR
; &        bitwise AND
; ~        bitwise NOT
; !        boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after
the equal
; sign, or by using the None keyword:
;
;  foo =         ; sets foo to an empty string
;  foo = none    ; sets foo to an empty string
;  foo = "none"  ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the
extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
short_open_tag = Off

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision    =  14

; Enforce year 2000 compliance (will cause problems with non-compliant
browsers)
y2k_compliance = Off

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit.  You can enable output buffering during runtime by calling the output
; buffering functions.  You can also enable output buffering for all
files by
; setting this directive to On.  If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of
'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering=4096

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "ob_gzhandler", output will be
; transparently compressed for browsers that support gzip or deflate
encoding.
; Setting an output handler automatically turns on output buffering.
output_handler =mb_output_handler

; The unserialize callback function will called (with the undefind class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
;
; Note: output_handler must be empty if this is set 'On' !!!!
;
zlib.output_compression = Off

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo()
and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; Whether to enable the ability to force arguments to be passed by reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the
function
; declaration.  You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead
of by
; reference).
allow_call_time_pass_reference = On

; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
;
;open_basedir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note:  If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment
variables that
; the end user won't be able to change using putenv().  These variables
will be
; protected even if safe_mode_allowed_env_vars is set to allow to change
them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; This directive allows you to disable certain functions for security
reasons.
; It receives a comma-delimited list of function names.  This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <font color="??????"> would work.
highlight.string  = #CC0000
highlight.comment = #FF9900
highlight.keyword = #006600
highlight.bg      = #FFFFFF
highlight.default = #0000CC
highlight.html    = #000000


;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header).  It is no
security
; threat in any way, but it makes it possible to determine whether you
use PHP
; on your server or not.
expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 30     ; Maximum execution time of each script, in
seconds
memory_limit = 8M      ; Maximum amount of memory a script may consume (8MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each number up to get desired error
; reporting level
; E_ALL             - All errors and warnings
; E_ERROR           - fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often
result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it's automatically initialized
to an
;                     empty string)
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE
;
;   - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors except for notices
;
error_reporting  =  E_ALL

; Print out errors (as a part of the output).  For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below).  Keeping display_errors enabled on a production
web site
; may reveal security information to end users, such as file paths on
your Web
; server, your database schema or other information.
display_errors = On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.  It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log
(below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
;html_errors = Off

; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST,
Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to
right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables.
You may
; want to turn this off if you don't want to clutter your scripts'
global scope
; with user data.  This makes most sense when coupled with track_vars -
in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on;  Using form variables as globals can easily
lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information).  If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; Maximum size of POST data that PHP will accept.
post_max_size = 8M

; This directive is deprecated.  Use variables_order instead.
gpc_order = "GPC"

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, from
exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; cgi.force_redirect configuration below
doc_root =

; The directory under which PHP opens the script using /~usernamem used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
extension_dir = /usr/lib/php4

; Whether or not to enable the dl() function.  The dl() function does
NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is
automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a
CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1

; if cgi.force_redirect is turned on, and you are not running under
Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable
name that PHP
; will look for to know it is OK to continue execution.  Setting this
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default
if not
; specified).
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
upload_max_filesize = 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Define the anonymous ftp password (your email address)
;from="john ＠ doe.com"


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directory
information
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.

;Linux world
;
extension=imap.so
extension=ldap.so
extension=mysql.so
extension=odbc.so
extension=pgsql.so
;extension=snmp.so
;extension=dbg.so


;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[debugger]
debugger.enabled = False ; enables dbg extension
; May cause problems when
; being acessed through a
; firewall, if the debugging
; port isn't allowed through
; hense it is off by default
debugger.profiler_enabled = True ; enables dbg profiler
debugger.JIT_enabled = True ; enables JIT sessions
; (auto-activated)
debugger.JIT_port = 7869 ; default port to be used this
; should be the same as the
; port number opened by the
; dbg listener
debugger.JIT_host = clienthost  ; either real client IP or
; a keyword "clienthost"
debugger.JIT_level = 3 ; JIT activation level
;   0 - disables JIT,
;   1 - E_CORE,
;   2 - E_CORE | E_ERROR |
; E_PARSE |
; E_COMPILE_ERROR |
; E_USER_ERROR
;   3 - E_ALL & ~(E_NOTICE |
; E_USER_NOTICE)
;   4 - E_ALL


[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling
define_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Unix only.  You may supply arguments as well (default: "sendmail
-t -i").
sendmail_path = /usr/sbin/sendmail -t -i

[Java]
;java.class.path = .\php_java.jar
;java.home = c:\jdk
;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
;java.library.path = .\

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert
to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an
explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect()
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will
only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
cfg_get_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access
to this
; file will be able to reveal the password as well.
mysql.default_password =

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect(). Need a
little overhead.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
pgsql.max_links = -1

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results
according
; to their Sybase type, instead of treating them all as strings.  This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of
its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of
its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns.  May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1.  In
that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
session.save_path = /tmp

; Whether to use cookies.
session.use_cookies = 1


; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Handler used to serialize data.  php is the standard serializer of PHP.
session.serialize_handler = php

; Percentual probability that the 'garbage collection' process is started
; on every session initialization.
session.gc_probability = 1

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public} to determine HTTP caching aspects.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
;   to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
;   in publically accessible computer.
; - User may access your site with the same session ID
;   always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0

url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 = all records in one batch.
;mssql.batchsize = 0

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting().  Set to true if
you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ingres.max_persistent = -1

; Maximum number of links, including persistents.  -1 means no limit.
ingres.max_links = -1

; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =

; Default user.
ingres.default_user =

; Default password.
ingres.default_password =

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On

[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[Printer]
;printer.default_printer = ""

[mbstring]
; 内部文字列表現に際して使用する言語
mbstring.language = Japanese

; 内部/スクリプト のエンコーディング
; 内部エンコーディングとしては指定できないものも存在する
; (すなわち BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; --enable-zend-multibyte コンパイルオプションにより、internal_encoding に
; SJIS も指定できるようになりました。この場合 script_encoding はもはや意味
; を持ちません（多分）。
mbstring.internal_encoding = SJIS

; http 入力時のエンコーディング
; "auto" は、"ASCII,JIS,UTF-8,EUC-JP,SJIS"に展開されます。
mbstring.http_input = auto

; http 出力時のエンコーディング。mb_output_handler が出力バッファのリダイ
; レクト先の関数として指定されている必要がある。
mbstring.http_output = SJIS

; mbstring.internal_encoding の設定にしたがって、自動的に HTTP 入力データ
; の変換を行う。これを On にすると、入力された文字は内部エンコーディング
; に変換される。複数のプラットフォームで動作させるようなライブラリやアプ
; リケーションではエンコーディングの自動変換を行わないこと。
mbstring.encoding_translation = On

; エンコーディングを自動認識する際の優先順位
mbstring.detect_order = auto

文字が変換できなかった場合に使用する代替文字の文字コード
mbstring.substitute_character = none;

; シングルバイト用の関数を mbstring 関数群でオーバーロード（上書き）する。
; mail(), ereg()などをそれぞれ mb_send_mail(), mb_ereg() などに置き換える。
; 0,1,2,4 およびそれらの組み合わせが指定可能。たとえば 7 はすべて置き換
える。
; 0: 置き換えなし
; 1: mail() 関数を置き換える
; 2: str*() 関数を置き換える
; 4: ereg*() 関数を置き換える
mbstring.func_overload = 0

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000

; Local Variables:
; tab-width: 4
; End:

useradd.php
<?php
        // ● Pead DBクラスライブラリをインクルード
        ini_set("include_path",ini_get("include_path"));
        require_once 'DB.php';

        // ● 変数セット
        // DSNを設定
        $dsn = "pgsql://nova001: @localhost/nova001";

        // ● DBへ接続
        $db = DB::connect( $dsn );




        $sql = "SET CLIENT_ENCODING TO 'SJIS'";
	$res = $db->query( $sql );


?>
<html>
<head>
<title>ユーザー登録</title>
<meta http-equiv="Content-Type" content="text/html; charset=Shift_JIS">
</head>
<?php

if($type == "追加"){
	if($corp_name == null){ print "名が入力されていません<br>";}
	elseif($corp_id == null){ print "IDが入力されていません<br>";}
	elseif($corp_pass == null){ print "パスワードが入力されていません<br>"; }
	else{
	if($corp_riyou == null){ $check = "no";}
	else{ $check = "yes"; }
	$sql = "SELECT max(corp_no) FROM corp";
	$res = $db->query( $sql );
        $row= $res->fetchRow( DB_FETCHMODE_ASSOC );
	$corp_no = $row["max"] + 1;
	$date = date("Y/m/d",time());
        $sql = "INSERT INTO corp (
corp_no,corp_name,corp_id,corp_pass,riyou,corp_date)";
        $sql .= "values
('$corp_no','$corp_name','$corp_id','$corp_pass','$check','$date')";
	 $res = $db->query( $sql );
	}
}
?>

<body bgcolor="#FFFFFF" text="#000000">
<form name="form1" method="post" action="useradd.php">
  <table width="75%" border="1" bgcolor="#CCFFFF"
borderColorDark=#0066ff borderColorLight=#00ffff>
    <tr bgcolor="#000099">
      <td>
        <div align="center"><font color="#A6FFFF"><b>名</B></FONT></div>
      </td>
      <td>
        <div align="center"><font color="#A6FFFF"><b>ID</b></font></div>
      </td>
      <td>
        <div align="center"><font color="#A6FFFF"><b>パスワード</b>
</font></div>
      </td>
      <td>
        <div align="center"><font color="#A6FFFF"><b>利用可否</b></font>
</div>
      </td>
      <td>　</td>
    </tr>
<?php
        // レコード内容表示のSQL文
        $sql = "SELECT * FROM corp";

        // クエリー実行 ($resには DB_resultが返る)
        $res = $db->query( $sql );

   	while ($row = $res->fetchRow( DB_FETCHMODE_ASSOC )  ) {
$corp_no = $row["corp_no"];
$corp_id = $row["corp_id"];
$corp_name = $row["corp_name"];
$corp_pass = $row["corp_pass"];
if ($row["riyou"] == "t"){
$corp_riyou = "OK";
}
else { $corp_riyou = "NG"; }

print <<<EOF
    <tr>
      <td>
        <div align="center">
         $corp_name
        </div>
      </td>
      <td>
        <div align="center">
         $corp_id
        </div>
      </td>
      <td>
        <div align="center">
         $corp_pass
        </div>
      </td>
      <td>
        <div align="center">
          $corp_riyou
        </div>
      </td>
      <td>
	<a href="calendaradd.php?id=$corp_no">データ登録</a>
      </td>
    </tr>
EOF;
}

$corp_no = $corp_no +1;
print <<<EOF
    <tr>
      <td>
        <div align="center">
          <input type="text" name="corp_name">
        </div>
      </td>
      <td>
        <div align="center">
          <input type="text" name="corp_id">
        </div>
      </td>
      <td>
        <div align="center">
          <input type="text" name="corp_pass"><input type="hidden"
name="corp_no" value="$corp_no">
        </div>
      </td>
      <td>
        <div align="center">
          <input type="checkbox" name="corp_check" value="check">
        </div>
      </td>
      <td>
        <div align="center">
          <input type="submit" name="type" value="追加">
        </div>
      </td>
    </tr>
EOF;
        // ResultSet開放
        $res->free();



        // ● DB接続終了
        $db->disconnect();
?>
  </table>
</form>

</body>
</html>

以上よろしくお願いいたします。